A man called Aranda approached the little boy’s mom at a group at the mall on the 12 of April 2019. Landen mom asked him if they were in his way and should move. Without hesitation or warning the stranger picked up Landen and threw him from the balcony at the Mall of America.
Surprisingly, this isn’t the first time 24-year-old has committed crimes at the mall. Aranda has two prior assault convictions from 2015 and was apparently banned from the the Mall of America for a period of time. He was also instructed to undergo psychological evaluation following those earlier attacks.
Later that day Aranda admitted to throwing the boy off the balcony to Police after they captured on a light rail train leaving the mall. He also told the police that he had attempted to kill somebody the day before (preferably an adult), but it didn’t “work out.”
He is being held in Hennepin County Jail in lieu of $2million bail and is scheduled to appear in court on May 14.
The suspect’s uncle, Francis Aranda, told KSTP that his nephew had displayed violent tendencies since childhood.
‘He has a serious mental problem, he was diagnosed as a child,’ the relative said.
He added: ‘We are going to pray for that baby [Landen] because what happened is so unfortunate, but it’s going to bring light to mental illness, I hope he [Aranda] doesn’t go to jail, he needs help.’
Pastor Mac Hammond (above) at the church Landen Hoffmann’s family attends in Woodbury, Minnesota, updated the congregation on the five-year-old’s condition on Sunday, nine days after he was thrown off a third-story balcony at the Mall of America on April 12
In spite of being thrown off a balcony that could have killed him, doctors have reported that Landen is thankfully doing much better than expected to the point where even the medical staff are chalking it up to nothing but a “miracle.”
This is truly a miracle. It’s like he fell off a bicycle instead of off the third floor of the mall.”
Mac Hammon, the pastor of the family’s church, was contacted by Landen’s grandpa on Sunday during the Easter sermon.
The results were obtained after a 5-hour MRI. “Doctors said they found no brain damage – not even any swelling,” Hammond told church congregants on Easter. “No spinal damage, no nerve damage ”¦ doctors are saying it is truly a miracle.”
Mac Hammon, shared that the boy did suffer many broken bones, including fractures on his arm, leg, and face. He will also need to have his spleen removed.
The GoFundMe page set up for Landen posted this encouraging update a week after the incident:
“The power of prayer is simply amazing. We all have been extremely humbled by the outpouring of support and prayers from everyone. Thank you for showing us there is so much good not only in our community but across the globe. Condition is again similar to previous days, another peaceful night of sleep — small steps towards the healing process. Each new day is a good day. Landen’s recovery is expected to be ongoing for a long time, while it’s hard to estimate costs, this will change everything for their family and require much of their time and focus.”
Over 27,000 people have donated to a GoFundMe campaign that has raised more than $961,000 as of Tuesday morning.
Mental Health Facts, Stats, and Data
Over 44 million American adults have a mental health condition. Since the release of the first State of Mental Health in America report (2015), there has only been a slight decrease in the number of adults who have a mental health condition (from 18.19% to 18.07%)
Rate of youth experiencing a mental health condition continues to rise. Therate of youth with Major Depressive Episode (MDE) increased from 11.93% to 12.63%. There was only a 1.5% decrease in the rate of youth with MDE who did receive treatment. Data showed that 62% of youth with MDE received no treatment.
More Americans are insured and accessing care. We can continue to see the effects of healthcare reform on the rate of Adults who are uninsured. This year there was a 2.5% reduction in the number of Adults with a mental health condition who were uninsured.
…But many Americans experiencing a mental health condition still report having an unmet need. 1 in 5, or 9 million adults reported having an unmet need.
Mental health workforce shortage remains. Many states saw some improvement in their individual to mental health provider ratio. But in states with the lowest workforce there was almost 4 times the number individuals to only 1 mental health provider.
A nine-strong committee look pretty similar: eight white men and white woman. This is the body that guides Britain’s economy and that is suppose to represent the diverse community the UK now represents.
Their monthly votes on interest rates ultimately determine how far our money goes.
Yet they don’t look anything like the people whose lives they have so much influence over, why is that? Its because the Bank of England has a Diversity Problem
The UK population is made up of different ethnicities. 87% of people are White, and 13% belong to a Black, Asian, Mixed or Other ethnic group and Women make up half of the UK population. Astoundingly 0% of the Monetary Policy Committee belong to a Black, Asian, Mixed or other ethnic groups and women make up one ninth of the committee. Shocking!
Mark Carney current governor is in fact, the 120th in a continuous line of white men to have headed the Bank.
It’s plain obvious the Bank has a diversity problem. But this is not a isolated issue as many other organisations in Britain have this very same problem.
The Public Accounts Committee (PAC) said last month that the Bank was some way off its diversity targets for next year “with little evidence the gap is closing quickly enough”.
Joanna Place the Bank’s chief operating officer also said: “In terms of diversity and inclusion, we have done a lot more than just gender and ethnicity.
“We have a number of staff networks. We have inclusive events. We have a wellbeing policy. We have done a cognitive diversity survey. We have started to look at social mobility,” she added.
Unfair
The Bank’s search for a new governor kicked off earlier this week and many are hoping that this could herald the start of a new era with a black governor at the helm for the first time in its history. However, Wendy Carlin, a professor of economics at University College London, says the problem is not with the Bank of England, but the economics profession itself.
Minorities quit Bank of England as it fails on diversity
More troubling were the committee findings into the proportion of BAME employees at the organisation, with an increase of just 3 per cent between 2015 (15 per cent) and 2018 (18 per cent), and no increase between 2017 and 2018.
Just 5 per cent of employees working at senior management level came from a BAME background in 2018. This is not a coincidence.
Ethnic minority employees are leaving the Bank of England in disproportionate numbers and feel less comfortable with the organisation’s culture, according to internal research.
The Bank’s non-executive directors admitted that the “BAME [black, Asian and minority ethnic] resignation rate was above that for the Bank as a whole” and said that it was actively addressing the problem, according to minutes of a recent meeting. But that’s not enough.
Statistics already show that BAME workers in UK are third more likely to be underemployed — report and probibly less likely to study economics, let alone get a job in the sector. TUC says study highlights a waste of black, Asian and minority ethnic talent and urges more effort to tackle discrimination at work
“We know this is part of a much bigger story. BAME workers are more likely to be unemployed, paid less, and aren’t getting enough of the top jobs. Employers and the government cannot afford to ignore these problems. They must now take real action to tackle underemployment and pay discrimination.”
The former business secretary Sajid Javid had called on businesses to do more to support the careers of black and minority ethnic (BME) workers and commissioned Ruby McGregor-Smith, the chief executive of the facilities management company Mitie, to undertake an independent review of BAME progression at work. The review is due to report by the end of this year.
Dr Heffernan says the profession itself should try to make sure it is attracting the widest possible pool of applicants.
“How you word a job will define someone’s right to apply. If you’re not getting the right kind of applicants then describe the job differently and see what happens.”
Christian’s can help
If the Church put more effort into actively encouraging its members to work in professions that would benefit greatly from a strong moral compass, and then support them in those roles, just think what benefit to our country there might be.
Facts about the The Monetary Policy Committee (MPC)
The Monetary Policy Committee (MPC) is made up of nine members — the Governor, the three Deputy Governors for Monetary Policy, Financial Stability and Markets and Banking, our Chief Economist and four external members appointed directly by the Chancellor.
External members are appointed to make sure that the MPC benefits from thinking and expertise from outside of the Bank of England. A representative from HM Treasury also sits with the MPC at its meetings. The Treasury representative can discuss policy issues, but is not allowed to vote. They are there to make sure that the MPC is fully briefed on fiscal policy developments and other aspects of the Government’s economic policies, and that the Chancellor is kept fully informed about monetary policy.
Each member of the MPC has expertise in the field of economics and monetary policy. Members do not represent individual groups or areas — they are independent.
MPC members serve fixed terms, after which they may be either replaced or reappointed.
The PAC has called on the bank to provide a report setting out the additional steps it will take to ensure it meets its diversity targets by June 2019.
Godinterest’s Manifesto of Ethics
To promote freedom of religion — Violations of religious freedom are increasing globally in scale, depth and blatancy. Carried out by both government and non-state actors, they range from the mundane to the extreme (e.g. genocide).
To promote freedom of expression and internet freedom — Freedom of expression is an essential part of a properly functioning democracy and a free society. People should be free to express themselves both online and offline. But in many parts of the world freedom of expression is under threat.
To be a inclusive social network — We aim to share multiple voices and perspectives. We prohibit and will remove Offensive material that has been reported to contain (e.g., Pornographic material, hate speech, encouraging violence against others, etc)
To respect one’s right to remain anonymous — Our users place their trust in us to keep them safe, and, in some cases, anonymous. We view safeguarding that trust and protecting our users’ private information as vital to what we do.
As soon as Rhys heard the front door open, he jumped up and began shouting for joy, “Mom Daddy’s home, Daddy’s home!”. His heartbeat racing and his brown eyes shining excitedly, anticipating playtime with Daddy. A wide grin spread across Rhys’s face as Daddy acted like a big bear. Daddy quickly dropping down onto one knee so that he’d be at his son’s height to horse around the living room. Sadly this scene is becoming a rear sight to see.
Today let’s talk about the invisible dads, the ones who don’t marry Mummy, don’t support their kids and don’t hang around for the hugs, kisses and nappy changes. There are millions of them around the world, and their numbers are growing.
“Today, more than one in four births is to an unmarried mother, and more than one in 10 births is to a teenager. These numbers portend a future of fragile families. Once considered primarily a racial problem, fatherless homes have increased across a wide range of demographics over the last ten years.”
How have we come to the point where a child with two parents is the exception rather than the norm? It is time that we put the issue of fatherless families front and center on our national agenda.
So who’s the real problem here? And why should we care?
It is time to shift our attention to the issue of male responsibility, and to the indispensable role that fathers play in our society.
Firstly, it would be an oversimplification to assume that two parents are always better than one as there are many courageous and loving single moms and daddy’s who are able to balance the competing demands on their time and attention, to care and provide for their children alone.
However, contrary to the sentiments of our culture and though our society is only beginning to recognize it, the presence of fathers within the home is vital to the moral integrity of a society. The short-term effects are already far too evident as statistics reveal that the loss of fathers is reverberating throughout the world in the form of social pathologies ranging from teen pregnancy to drug abuse.
Fatherless children are five times more likely to be poor and twice as likely to drop out of school as children who live with both parents.
Boys, without proper male role models, look to other sources for the male bonding they need. In the inner cities that often entails gangs while in the suburbs it tends to be online.
“According to the latest statistics, the increase in the proportion of single-parent families accounted for about half of the overall increase in child poverty from 1979 through to 1987.”
The Scriptures warn us about the power of fatherhood, as well as the long-lasting impact that fatherhood has on us all. Exodus 20:4-6.” Fatherlessness is the most harmful demographic trend of this generation
The apple doesn’t fall far from the tree
“The apple doesn’t fall far from the tree” could be both about habits/behavior and also looks. Have you ever thought about that? Do you often find yourself reacting to a situation the way your father did? or scarier yet…do you ever see your mannerisms in your son? The footprint of a father leaves a permanent mark on the soul of a child.
Fatherhood is under assault
We hear a lot about the war on women…but it is the war on Dads that is causing the greatest damage in the world today. It’s not hard to find. If you watch any popular sitcom on television today, you’ll likely notice that fathers are typically portrayed as childish, irresponsible, lazy, incompetent and stupid.
The doofus dad stereotype isn’t new. There’s Fred Flinstone, and even Charlie Brown’s monotone parents. But according to Tierny, the consistency of these new portrayals has slowly created a new norm opposed to what being a father used to mean.
Dads make a difference. Dads can be heroes – if only we give them the chance. We remain optimistic that family still has more influence than media.
We all need another hero
Fathers are representatives of God on earth; as our heavenly father is the giver of life so also are the earthly father’s givers of life. Malachi 4:6 says “And he will turn, the hearts of the fathers to the children, And the hearts of the children to their fathers, Lest I come and strike the earth with a curse.”
God understands the importance of a father’s love and cares towards their children and He has set the standard by being the first example of a loving father.
“The SARRI report quotes research which found that “the presence of a father can contribute to cognitive development, intellectual functioning, and school achievement. Children growing up without fathers are more likely to experience emotional disturbances and depression.”
“Girls who grow up with their fathers are more likely to have higher self-esteem, lower levels of risky sexual behaviour, and fewer difficulties in forming and maintaining romantic relationships later in life. They have less likelihood of having an early pregnancy, bearing children outside marriage, marrying early, or getting divorced.”
A father’s touch
The first thing, therefore, that a father can do for his children is to love their mother. Another part of a father’s task is that of a protector for his family. But, Daddy also has another task in the home, which is to combine tenderness with strength, and to model the combination so consistently that the children regard the combination as natural.
Our kids must come to know naturally both that dad’s standards protect them, and that his love makes them strong.
Where have all the fathers gone?
Our courts do not value fatherhood as much as motherhood. In 2015 it is still the case that mothers and fathers do not have equal rights
And herein lies the problem. Our expectation of the role a separated father should play in his children’s lives is so low, that when half of dads who win “access” to their kids can’t even sleep under the same roof as their offspring, academics declare this to be an overwhelming success. One of the fruits of the feminist movement many claim is the idea that a woman is more responsible as a parent than the father is.
“He is not my Dad…he is just someone you sleep with!” How many mothers have felt the sting of those words? That is why God hates divorce. We should too.
Our culture has put asunder things which God has joined together—things such as tenderness and strength. It is the job of the father to put them back together again.
Fatherhood, like Motherhood has is its own rewards – as most dads have found. Sadly, for the others, the invisible ones, it is a gift foolishly squandered.
The Nigerian construction industry is mostly concerned with the development and provision of projects such as roads, bridges, railways, residential and commercial real estates, and the maintenance necessary for the socio-economic developments contributes immensely to the Nigerian economic growth (Bureau of Statistics, 2015). Butcher and demmers (2003) described projects as an idea which begins and ends by filling a need. However, a project fails when its idea ends without meeting the needs and expectations of its stakeholders.
Nigeria Has Become the World’s Junk – Yard of Abandoned and Failed Projects worth Billions of Naira!
Hanachor (2013), revealed that projects form part of the basis for assessing a country’s development. However, a damming report from the Abandoned Projects Audit Commission which was set up by the Ex-President Goodluck Jonathan in 2011 revealed that 11,886 federal government projects were abandoned in the past 40 years across Nigerian (Abimbola, 2012). This confirmed the assertion by Osemenan (1987) “that Nigeria has become the world’s junk –yard of abandoned and failed projects worth billions of naira”.
Abandoned projects including building and other civil engineering infrastructure development projects now litter the whole of Nigeria.
Physical projects do not only provide the means of making life more meaningful for members of the community where the projects are located, successful projects also result in empowerment and collective action towards self improvement (Hanachor, 2013).
This Issue of Abandonment Has Been Left Without Adequate Attention for Too Long, and Is Now Having a Multiplier Effect on the Construction Industry in Particular and the Nigeria’s National Economy as a Whole. (Kotngora, 1993)
PROJECT FAILURE
Project Failure might mean a different thing to different stakeholders. A project that seemed successful to one stakeholder may be a total failure to another (Toor and Ogunlana, 2008). Some stakeholders, more especially the project users and some private owners, think of failed projects as a situation where a completed building project collapsed, a situation where by a completed dam project stopped working after few days of completion, or a completed road project that broke down after few months of completion. Other experienced stakeholders, such as engineers and architects conform to the iron triangle by Atkinson (1999) which states that the most strategically important measures of project failure are “time overrun”, “cost overrun”, and “poor quality”.
Turner (1993) noted that a project fails when the project specifications are not delivered within budget and on time;the project fails to achieve its stated business purpose; the project did not meet the pre-stated objectives; the project fails to satisfy the needs of the project team and supporters; and the project fails to satisfy the need of the users and other stakeholders. Lim and Mohamed (1999) cited in Toor and Ogunlana (2009) clarified that there are two possible view points to project failure namely; the macro-level and the micro-level. They further explained that the macro view point reviews if the original objectives and concepts of the project was met. Usually the end users and the project beneficiaries are the ones looking at the project failure from the macro view point, where as the project design team, the consultants, contractors, and suppliers review projects from a micro view point focusing on time of delivery, budget, and poor quality.
In the early 1990s, the failure as well as the success of any project was determined by the project duration, monetary cost, and the performance of the project (Idrus, Sodangi, and Husin, 2011). Belout and Gauvrean (2004), also confirmed that the project management triangle based on schedule, cost, and technical performance is the most useful in determining the failure of a project. Moreover, a project is considered as an achievement of specific objectives, which involves series of activities and tasks which consume resources, are completed within specifications, and have a definite start and end time (Muns and Bjeirmi 1996, cited in Toor and Ogunlana, 2009). Reiss (1993) in his suggestion stated that a project is a human activity that achieves a clear objective against a time scale. Wright (1997) taking the view of clients, suggested that time and budget are the only two important parameters of a project which determines if a project is successful or failed. Nevertheless, many other writers such as Turner, Morris and Hough, wateridge, dewit, McCoy, Pinto and Slevin, saarinen and Ballantine all cited in Atkinson (1999), agreed that cost, time, and quality are all success as well as failure criteria of a project, and are not to be usedexclusively.
FACTORS OF PROJECT FAILURE
Cookie-Davies (2002) stated the difference between the success criteria and the failure factors. Hestated that failure factors are those which contributed towards the failure of a project while success criteria are the measures by which the failure of a project will be judged. The factors constituting the failure criteria are commonly referred to as the key performance indicators (KPIs).
Timeand Cost Overrun
The time factor of project failure cannot be discussed without mentioning cost. This is because the time spent on construction projects has a cost attached to it. Al-Khali and Al-Ghafly, (1999); Aibinu and Jagboro, (2002) confirmed that time overrun in construction projects do not only result in cost overrun and poor quality but also result in greater disputes, abandonment and protracted litigation by the project parties. Therefore, focus on reducing the Time overrun helps to reduce resource spent on heavy litigation processes in the construction industry (Phua and Rowlinson, 2003). Most times, the time overrun of a project does not allow resultant system and benefits of the project to be taking into consideration (Atkinson, 1999). Once a project exceeds the contract time, it does not matter anymore if the project was finally abandoned or completed at the same cost and quality specified on the original contract document, the project has failed. Furthermore, Assaf and Al-Hejji, (2006) noted that time overrun means loss of owner’s revenue due to unavailability of the commercial facilities on time, and contractors may also suffers from higher over heads, material and labour costs.
Poor quality/Technical Performance
The word “Performance” has a different meaning which depends on the context it is being used and it can also be referred to as quality. Performance can be generally defined as effectiveness (doing the right thing), and efficiency (doing it right) (Idrus and Sodangi, 2010). Based on this definition of performance, at the project level, it simply means that a completed project meets fulfilled the stakeholder requirements in the business case.
CAUSES OF PROJECT FAILURE
A lot of research studies have investigated the reasons for project failures, and why projects continue to be described as failing despite improved management. Odeh and Baltaineh, 2002; Arain andLaw, 2003; Abdul-Rahman et al., 2006; Sambasivan and Soon, 2007; all cited in Toor and Ogunlana, 2008, pointed out the major causes of project failures as Inadequate procurement method; poor funding and availability of resources; descripancies between design and construction; lack of project management practices; and communication lapses
The contract/procurement method
A result obtained from two construction projects which were done by the same contractor but using different procurement methods showed that rework, on the design part which occurs when the activities and materials order are different from those specified on the original contract document, makes it difficult for the project to finish on the expected time (Idrus, Sodangi, and Husin, 2011). This is as a result of non-collaboration and integration between the design team, contractor, and tier suppliers. The rework on the design portion has a huge impact on project failure leading to the time overrun. The traditional method of procurement has inadequate flexibility required to facilitate late changes to the project design once the design phase of the construction project has been concluded.
Nigerian most widely used procurement method is the traditional method of procurement (design-bid-construct) which has been confirmed to be less effective to successfully delivery of a construction project (Dim and Ezeabasili, 2015). And, the world bank country procurement assessment report (2000) cited in Anigbogu and Shwarka, (2011) reported that about 50% of projects in Nigeria are dead even before they commence because they were designed to fail.
The way the construction projects are contracted, in addition to the way the contracts are delivered, contributes to the causes of projects failure. Particularly, among the methods of project contracting is lump-sum or a fixed-price contracting method, in which the contractor agrees to deliver a construction project at a fixed price. The fixed-price contract can be low-bid or not however, once the contract cost has been agreed upon the contract award, it cannot be changed. And, contractors are expected to honor and deliver the contract agreement, failure to do so can result in a breach of contract which can result in the contractor being prosecuted.
Awarding a contract to an unqualified personnel also contributes to project failures. When a contractor places more emphasis on money and the mobilization fee after a construction project has been initiated instead of getting the right workforce and skilled professionals that will execute the project. Instead the workforce chosen will often not be base on competence and required skills rather it will be based on availability. Moreover, poor strategy and planning by contractors who have overloaded with work also contributed to one of the causes of project failure.
Poor funding/Budget Planning
A lot of public projects in the Nigerian construction industry failed as a result inadequate funding, and the difference between the national annual budget and the budget actual released. Most of the Nigerian public projects are signed even before the actual release of the national budget. The difference in budget of the contracted project and the actual budget release can get the contracted company stuck as a result of inflation of prices, scarcity of construction material at the time of the budget release and mobilization to site. Also un-planned scope of work which can be as a result of the contractor working on another contract when he is called back to mobilization to start work. Moreover, poor budget planning is a regular mistake made by some contractors by not undertaking feasibility assessments before starting the design. The construction project should be planned according to the available resources and not according to the unrealistic expectations a client has in mind.
Discrepancies Between the Design and Construction
Limited collaboration between the contractors, engineers, and the architect results in discrepancies between the project designs and construction on site, and further leads to rework. Changes on a project designs, and changing to the scope of work in the middle of construction processes on site can be dangerous, and can lead to time overrun, increase in cost, and most of all can lead to abandonment. Moreover, many cases have been seen where the designs from the architects are not buildable on site, whileIn some cases, most contractors are unable to adequately specify the scope of work for the construction processes on site. Therefore any default on the design by the architect can be an opportunity for the contractor to make more money which might cause the project duration to exceed the time specified on the contract document.
RESEARCH METHODOLOGY
This research starts with a general reasoning or theory which says that the major cases of project failure in the Nigerian construction industry are defined based on time overrun and cost overrun. The findings from the data analysis will help on the decision to accept the theory or not. The research data was collected from the progress report for the month ending of October, 2015 published by the Nigeria of Federal Ministry of works on thirty-nine on-going highway construction projects at the South-South geopolitical zone. The table 1 below shows the information on the data collected which comprises of the project title, contract Number, project description, the contractor that was awarded the projects, the date of project commencement, date of completion and the extended date if any. The scheduled time for each project was specified as follows: project commencement date labeled as “a”,project completion date labeled as “b”, and the extended date labeled as “c”.
Table 1: The analyzed data on the highway project at the South-South zone in Nigeria.
DATA ANALYSIS
The data analysis was done with the use of Microsoft excel. The analysis started by obtaining the number of days between the date of commencement of each project and the date of completion to show the duration of each highway project. And, the number of days between the project completion date and the extension date showed the time-overrun. The project duration and the extended days were obtained with the use of NETWORKDAYS function in Microsoft Excel which calculates the number of working days between two dates excluding weekends and any dates identified as holidays.
The standard deviation between the specified project duration for each highway projects and the extended days was calculated to obtain the extent to which each highway project contract failed on its time of delivery. This was denoted as the degree of failure. The table 1 above showed the projects ranking which was done based on the degree of failure of all the highway projects. The highway projects that were ranked from one to sixteen have low degree of failure and are represented with green color, while the rest are those with high degree of failure and are represented with red color.
FINDINGS
The findings made showed that the successfully completed highway projects have no extended days or time overrun, and the successful on-going highway projects are still on schedule and have no extended days unlike the on-going highway projects that have already failed as a result of the extended dates. Other projects have been abandoned because they have exceeded the delivery date as specified on the contract document, and have no extended date of completion. Thus, no work is going on.
Figure 1: Abundance of failed highway projects at south-south zone, Nigeria.
Figure 2: On-going failed highway projects
Figure 2 above showed that 14% of highway projects are still on-going projects because they have not exceeded the original date of completion as specified on the contract document. However, they are heading towards failure because they have been given an extended date of completion which can be as a result of some critical activities running behind schedule, causing delay on the critical path network of the projects. Moreover, the other 86% completely failed because they have exceeded their completion date specified on the contract document.
Figure 3: Successful on-going highway projects
The figure 3 above showed that 63% of the successful highway projects are still on-going because they have not exceed their completion dates, and they are not yet completed. However, those on-going highway projects might end up as failed projects as a result of poor funding, discrepancy between the design and the construction on site, and conflict between the construction parties or stakeholders.
“Say what you will do, and do what you said” or “Say as you will do it, and do it as you said”
CONCLUSION AND RECOMMENDATION
The idea of knowing what a failed project is, the factors and the causes is very important in project management. Success in project management can neither be achieved nor measured without the knowledge of project failure, its factors, and causes in the Nigerian construction industries. This work has shown that project failure is as a result of exceeded time of delivery, cost overrun, and poor quality. However, the analysis was only done based on exceeded time of project delivery because of the nature of the data collected.
This work suggested a few approaches to help reduce the number of failed projects in the Nigerian construction industry if properly implemented. Firstly, Having good collaboration between the project stakeholders involved in a construction project at the early stage of project conception is most important in order to accomplish the project objectives, and deliver the project on time, within budget, and quality specified on the original contract document (Othman, 2006).
Secondly, Adopting the ISO 9000 technique which is used for quality management will also help in achieving a successful project delivery. This technique states “ say what you will do, and do what you said” or “say as you will do it, and do it as you said”. This technique is not an indication of high quality but it promotes control and consistency which leads to specialization, and improved productivity and quality. Also, adopting the principles of lean construction will help to reduce waste within the construction and stream-line activities in order to improve the on-time delivery of projects.
Thirdly, Learning from the precedent failed projects, how those projects failed, and the reason for their failures. This will help the project manager to plan and mitigate the risks of project failures in the future. And, finally, more seminars and workshops will help to educate and enlighten clients (the federal government representatives), users, contractors, engineers, and architects on what is project failure, the factors that contributes to abundant failed projects, and their causes.
REFERENCE
Abimbola, A. (Novermber 24, 2012). About 12,000 Federal Projects Abandoned across Nigeria. Premium times (November 16, 2015). Retrieved from www. Premium timesng.com/news/108450-about-12000-federal-projects-abandoned-across-nigeria.html.
Al-Khali, M.I and Al-Ghafly, M.A. (1999). Important Causes of Delays in Public Utility Projects in Saudi Arabia. Construction management and Economics, 17, 647-655
Aibinu, A.A and Jagboro, G.O. (2002). The Effects of Construction Delays on Project Delivery in Nigeria Construction Industry. International journal of Project management, 20(8), 593- 599.
Anigbogu, N. and Shwarka, M. (2011). Evaluation of Impact of the Public Procurement Reform Program on Combating Corruption Practices in Public Building Project Delivery in Nigeria. EnvirontechJournal, 1(2). 43-51.
Assaf, S. and Al-Hajji, S. (2006). Causes of Delays in large Construction Projects. International Journal of Project Management, 24, 349-357.
Atkinson , R. (1999). Project management: Cost, time, and quality, two best guesses and a Phenomenon, it’s time to accept other success criteria. International Journal of project Management, 17(6), 337-342.
Belout, A and Gauvrean, C. (2004). Factors Influencing the Project Success: The impact of human resource management. International Journal of project Management, 22, Pp. 1-11.
Butcher, N. and Demmers, L. (2003). Cost Estiumating Simplified. Retrieved from www.librisdesign.org.
Cookie-Davies, T. (2002). The Real Success Factors on Projects. International Journal of Project management, 20(3), 185-190.
Dim, N.U. and Ezeabasili, A.C.C (2015). Strategic Supply Chain Framework as an Effective Approach to Procurement of Public Construction Projects in Nigeria. International Journal of Management and Susutainability, 4(7), 163-172.
Hanachor, M. E. (2012). Community Development Projects Abandonment in Nigeria: Causes and Effects. Journal of Education and Practice, 3(6), 33-36.
Idrus, A., Sodangi, M., and Husin, M., H. (2011). Prioritizing project performance criteria within client perspective. Research Journal of Applied Science, Engineering and Technology, 3(10), 1142-1151.
Idrus, A. and Sodangi, M. (2010). Framework for evaluating quality performance of contractors in Nigeria. International Journal of Civil Environment and Engineering. 10(1), 34-39.
National Bureau of Statistics (January, 2015). Nigerian Construction Sector Summary Report: 2010-2012.
Kotangora, O. O. (1993). Project abandonment, Nigerian Tribune.
Osemenan, I. (1987). Project Abandonment. New Watch Magazine, Vol. 1, pp. 15.
Phua, F.T.T and Rowlinson, S. (2003). Cultural Differences as an Explanatory Variable for Adversarial Attitude in the Construction Industry: The case of HongKong. Construction Management and Economics, 21, 777-785.
Reiss, B. (1993). Project Management Demystified. London: E and FN Spon Publishers.
Toor, S. R. and Ogunlana, S. O. (2008).Problems causing Delay in Major Construction Projects in Thailand. Construction management and Economics, 26, 395-408.
Toor, S. R. and Ogunlana, S. O. (2008). Critical COMs of Success in Large-Scale Construction Projects: Evidence from Thailand constructuction industry. International Journal of Project management, 26(4), 420-430.
Toor, S. R. and Ogunlana, S. O. (2009).Beyound the “Iron Triangle”: Stakeholder perception of key performance indicators (KPIs) for large-scale public sector development projects. International Journal of Project management, doi: 10.1016/j.ijproman.2009.05.005.
Toor, R. and Ogunlana, S. (2009). Construction Innovation: Information, process, management. 9(2), PP. 149-167.
Turner, J. R. (1993). The Handbook of project-Based Management: Improving the process for achieving strategic objective. London, McGraw-Hill.
Wright, J., N. (1997). Time and Budget: The twin imperatives of a project Sponsor. International Journal of Project Management, 15(3), 181-186.
The project management landscape is changing with an increased emphasis on productivity, reporting, and information technology. A number of studies have been completed that look into the success and failure rates of projects.
Below are 15 shocking statistics that reveal how project management has changed and is performing across various industries over the last 5 years.
There is projected to be 15.7 million new project management roles to be added globally across seven project-intensive industries by 2020 reaching an economic impact of over $18 trillion, across seven project-intensive industries including Manufacturing, Finance & Insurance, Information Services, Utilities, Business Services, Oil & Gas and Construction (Project Management Institute)
75% of IT executives believe their projects are “doomed from the start. (Geneca)
The healthcare industry is projected to increase project management roles by 30%, a higher growth rate than any current project intensive industry between 2010 and 2020. (Project Management Institute)
A third of all projects were successfully completed on time and on budget over the past year. (Standish Group)
80% of “high-performing” projects are led by a certified project manager. (PricewaterhouseCoopers, Insights and Trends: Current Programme and Project Management Practices 2012)
One in six IT projects have an average cost overrun of 200%. (Harvard Business Review 2004)
44% of project managers use no software, even though PWC found that the use of commercially available PM software increases performance and satisfaction. (Pricewaterhouse Coopers)
More than 90% of organizations perform some type of project postmortem or closeout retrospective. (The Standish Group: CHAOS Research Report 2013)
On average, it takes 7 years in the profession to go from entry-level to managing large, complex projects. (ESI International: Annual Salary Survey 2013)
The average large IT project runs 45% over budget, 7% over time, and delivers 56% less value than expected. (Project Management Institute: Pulse of the Profession 2015)
Only 64% of projects meet their goals. (Project Management Institute: Pulse of the Profession 2015)
60% of companies don’t measure ROI on projects. (KPMG New Zealand: Project Management Survey 2010)
The United States economy loses $50-$150 billion per year due to failed IT projects. (Gallup Business Review)
In just a 12 month period 49% of organizations had suffered a recent project failure. In the same period only 2% of organizations reported that all of their projects achieved the desired benefits. 86% of organizations reported a shortfall of at least 25% of targeted benefits across their portfolio of projects and many organizations failed to measure benefits so they are unaware of their true status in terms of benefits realization. (KPMG – Global IT Project Management Survey 2005)
According to an IBM study, only 40% of projects meet schedule, budget and quality goals. (Harvard Business Review 2004)
If you have any other project management statistics please share them with us.
Only one in three software projects will turn out to be successful. According to Standish Group’s 2015 Chaos report, 66% of technology projects (based on the analysis of 50,000 projects worldwide) end in partial or total failure. More surprisingly, these statistics have been the same for the last five years, the report shows. Furthermore, 17% of large IT projects go so badly that they can threaten the very existence of a company.
On Average, Large It Projects Run 45% over Budget and 7% over Time, While Delivering 56% Less Value than Predicted
Despite such failures, huge sums continue to be invested in IT projects and written off. For example the cost of project failure across the European Union was ┚¬142 billion in 2004.
It Projects Always Come with an Element of Risk, but There Are Huge Gains to Be Had If We Can Just Avoid Some of the Factors That Contribute Frequently to Project Failure
What makes a IT project successful, though?
According to the Standish Group, a successful project is on time, on budget and has satisfactory results (value, user and sponsor satisfaction, and meets target requirements). Other measures of success are widely known and accepted as true such as getting requirements right, providing effective leadership, and having full support and engagement from sponsors and users. Without these, it’s unlikely that any project would succeed.
But there’s more to success than what is widely known and, apparently, rarely followed. To reduce the risk of failure for your tech project, here are six key actions to take on the road to success.
1. Executive Vision and Involvement
Without a Executive Senior Sponsor Its Easy for Projects to Fail with the Organizational Resistance That Accompanies Large Change
Executive involvement is a primary variable in predicting the success of an IT project. Having a leadership team aligned across an organization articulating the purpose, value, and rationale for a project goes a long way towards getting stakeholders and end-users pulling the proverbial rope in the same direction.
2. Have a clear view of scope and timetable
Oftentimes, a tech project flops because its developers fail to plan and rush forward with an idea. However, some project managers plan so meticulously that they end up falling behind and lose momentum. The best approach is somewhere in between.
Interviewing team members, documenting requirements, prioritizing what is “mission critical” versus “nice to have,” getting agreement across stakeholders can feel like a never-ending cycle. As a result, requirement gathering has fallen out of fashion with many organizations in the past few years.
However, the ideal starting point for a successful technology project is to have a set of fundamental requirements with sufficient detail to develop against.
Requirement Gathering Is Labour-intensive and Challenging but Remains the Roadmap and Measuring Stick for Software Projects
This approach allows you to maintain sight of the business benefits as well as engaging stakeholders and responding to their feedback. In combination with a clear business case, a well-defined set of requirements also simplifies design and testing, two areas where projects tend to go sideways.
Ensure that requirements for the project are clearly defined and agreed upon among stakeholders and that you have a way to track, measure, and manage changes in requirements as appropriate during the project.
3. Define how you will deliver
When it comes to delivering a major project, one size does not always fit all. All products are customizable to some degree, so what might have worked in one company may not work in another company.
That being said, why reinvent the wheel if it’s already proven successful? Sometimes it can be more beneficial to use an existing off the shelf solution. Whichever direction you take, choose the delivery mode that works best for your company.
4. Risk Identification and Management
Every project has risk and there are many factors out of your control. People leave the organization, for better or worse, leadership changes, budgets get cut, however, many risks to projects can be mitigated or even eliminated with some forethought and on-going management. For example, do you have the resources you need to deliver the project (resource risk). Are project goals clearly understood and requirements clearly defined (scope risk). Do you have a realistic project plan and timeline (time risk).
Mitigating Risk Is a Combination of Science and Art, and Always a Balancing Process
5. Test your product again and again
A technology project is something that should overall support your business. It should not be something that dictates and forces you to change your operations. If this is happening, you should shift gears and focus on tweaking the technology, rather than lowering expectations and adopting less ideal requirements.
Adequate testing is a must for any tech project. While some features may be fine with automated testing, the best approach is to have a dedicated testing team. Testing activities should mirror those with the development team throughout the project’s lifetime. With thorough testing, a project should deliver with less design flaws or missing requirements.
6. Prioritize simplicity and performance
Developers often leave the external look and feel of a product to the wayside thinking these things are not necessities for the consumer to enjoy. However, user experience is absolutely critical to the success of the project.
Developers must consider things like storage, network requirements, processing speeds and overall performance in order to satisfy the customer. If users are going to have to wait for an extended period to allow information to load, there must be a good reason for the wait, otherwise they won’t return for future products.
Simplification and Improved Efficiency Is What Adds Value
Ultimately, using the product should be a smooth and intuitive experience. Additionally, tools and alternative routes must be placed logically without being intrusive. The process can be complicated, but the finished product should emit simplicity. After all, that’s what makes companies like Apple so successful. Simplification and improved efficiency is what adds value.
Small projects often embody more innovation than larger more costly or high profile ones.
Innovation is a wide concept that includes improvements in processes, products and services. It involves incorporating new ideas which generate changes that help solve the needs of a company and so increase its competitiveness. That’s hardly big news. But what may be surprising to some is that innovation has itself, well, innovated and it isn’t what it used to be.
New materials and energy, design approaches, as well as advances in digital technology and big data, are creating a wave of innovation within the construction industry. These new ideas are increasingly often tested and proven on smaller and agiler projects. Investing time and money is well spent on these ideas and technical improvements can then be used on large-scale developments.
Here are three exciting small projects:
Vanke Pavilion – Milan Expo 2015 / Daniel Libeskind
Vanke Pavilion – Milan Expo 2015 / Daniel Libeskind
VANKE PAVILION Milan, Italy
1. Vanke Pavilion – Milan Expo 2015
The corporate pavilion for Vanke China explores key issues related to the theme of the Expo Milano 2015, “Feeding the Planet, Energy for Life”.
Situated on the southeast edge of the Lake Arena, the 800-square meter pavilion appears to rise from the east, forming a dynamic, vertical landscape.
The original tiling pattern would have resulted in thousands of ceramic tiles of different sizes and shapes. The resulting complexity and lack of repetition could have led to high costs and a longer erection time.
Working with Architects Studio Libeskind, Format Engineers (Engineering Designers with backgrounds in structural engineering, coding, mathematics, and architecture) changed the pattern from thousands of different tiles to less than a dozen and simplified the backing structure generating huge cost savings. Format Engineers also proposed ‘slicing’ of the building and then fabrication of the primary structure of steel ribs using low tech flat steel plate elements. These were then used in a series of long span portalised frames reminiscent of the ribs and spars in traditional boat building resulting in a column-free area for the display of Chinese Cultural Heritage.
The frame was built to a budget and without difficulty ahead of the neighboring Expo buildings.
Building Size
12 meters high
740 mq gross floor area (exhibition, service & VIP levels)
130 mq roof terrace
Architect: Studio Libeskind
Engineer: Format Engineers
Oxford Brookes Rain Pavilion
Oxford Brookes Rain Pavilion
Oxford Brookes Rain Pavilion
2. Oxford Brookes Rain Pavilion
The Rain Pavilion is an urban forest sculpture forming the front entrance to Oxford Brookes University’s Architecture Faculty.
“Rain Pavilion artwork is a sensory experience for the community.”
The complex form required extensive wind modeling and comprehensive structural analysis within a generative 3d model. This was allied with Format Engineers in-house code for the self-organization of voids and their subsequent redistribution.
.At each stage of the design process different modeling and analysis techniques were used to exploit the form and to optimise the structure. The considerable challenges posed by the slenderness of the structure and its dynamic behavior under wind were resolved by combining Computational Fluid Dynamics (CFD) (a branch of fluid mechanics that uses numerical analysis and algorithms to solve and analyze problems that involve fluid flows) with a generative design environment. Conceptual design introduced the ideas of tubular stems and folded steel canopies, both of which were perforated by circular holes arranged to allow the interplay of light and water through the structure. The voids were generated using a self-organizing process.
Grasshopper (a graphical algorithm computer 3-D modeling tool) was used to produce a mesh that could include the voids in both the stems and the petals.
The Rain Pavilion is designed to celebrate the sound of rain, and the noise of water interacting with different sections of the installation is part of the experience of passing through it. The structure has a design life of five years and can be transported to other locations.
Architect: Oxford Brookes University, Oxford, UK
Engineer: Format Engineers
KREOD Pavilion
KREOD Pavilion
KREOD Pavilion
3. KREOD Pavilion
The KREOD pavilions were first erected on the London Greenwich Olympic site in 2012. Easily rearranged, three pod-like pavilions were formed with a wooden structural framework comprised of an open hexagonal composition.
Standing three meters tall, each double-curved wooden shell enclosed a footprint of 20 square meters, totaling 60 square meters. A waterproof tensile membrane sealed the interior from the elements fully portable with demountable joints, the individual components can be stacked for efficient transportation.
Chun Qing Li the architect required a temporary exhibition or function space that could be erected and demounted mostly by hand and by untrained staff. The quality of finish needed to echo that of handmade furniture and had to be low cost and quick to erect. The continuously changing double curved form of the enclosure meant that in theory, every nodal connection was different. A conventional bolted solution would have cost hundreds of pounds per fixing. Format Engineers suggestion of a ‘reciprocal’ jointed timber grid shell required standard bolts which equated to a fraction of the normal cost. It also allowed the structure to be built from simple and light flat timber elements.
The structure used Kebony timber throughout, a sustainable alternative to tropical hardwood. As this material had not previously been used in a structural context Format Engineers undertook load testing of the material and the connections at the University of Cambridge. The timber was fabricated using CNC routing (a computer controlled cutting machine) allowing a highly accurate fit between members and basic erection on site.
Megaprojects are crucial to the future of most cities, states, and individual livelihoods, however, they also attract a lot of public attention because of the substantial impacts they have on communities, environments, and government budgets. The objective of these projects is to unlock higher growth paths for the economy, as such, they require care in the project development process to reduce any possible optimism bias and strategic misrepresentation.
The problem is that these projects often go off the rails, either with regard to budget, time or both.
The risks associated with MegaProjects, those costing 1 billion or more, are well documented. In one influential study, Bent Flyvbjerg, an expert in project management at Oxford’s business school, estimated that nine out of ten go over budget.
The first factor is that the size of a MegaProject can be so large and unique that it is difficult to model the costs and logistics. Another factor is that MegaProjects are backed by governments which are not typically known for their success in budgeting or efficiency.
In today’s post, we’ve identified the Top 6 most impressive MegaProjects of 2015. These MegaProjects will transcend time and continue to bestow wonder upon new generations.
1. Mall of the World, Dubai
Mall of the World in Dubai was announced in July 2014, location in Al Sufouh district, along Sheikh Zayed Road, different from Mohammed bin Rashid City.
Dubai has a very ambitious project on its hands. Dubai’s Mall of the World will have its very own Oxford Street and Broadway. It will also have galleons and waterfalls. However, the most challenging part of this project is that the area will be covered by a giant retractable roof during the summer months and be climate-controlled creating the world’s first temperature controlled city.
Dubai Mall of the World Set to Put Uae Retail ’20 Years Ahead’ of Gulf Region
Launched with a fanfare by the emirate’s ruler, Sheikh Mohammed bin Rashid al Maktoum, it is the first state-sponsored mega-project to emerge from Dubai since the pre-crash bubble. After years of stalled projects the big plans are back and they are more ambitious than ever before.
It is thought the huge construction will attract 180 million visitors a year and developers hope it will secure Dubai’s futures as a tourism hub.
2. Mall of America, Minnesota
Mall of America, Minnesota
Mall of America, Minnesota
The Mall of America (MoA) is a gigantic shopping mall owned by the Triple Five Group and is by far the largest mall in the United States. However, the $325 million expansion of the nation’s largest shopping center is now underway. The project consists of a luxury 342-room hotel, an office tower and more than 50 shops and restaurants. Some 1,000 jobs are expected to be created during the construction phase of the project, and 2,500 permanent jobs from retail, hotel and office operations.
The Triple Five Group, owned by Canada’s Ghermezian family, owns and manages the Mall of America, as well as the West Edmonton Mall. MoA is located in Bloomington, Minnesota (a suburb of the Twin Cities).
3. Zurich North America, Chicago, IL
Rendering of Zurich North America’s new headquarters in the northwest suburbs of Chicago
Rendering of Zurich North America’s new headquarters in the northwest suburbs of Chicago
The $333 million site is currently under construction and will be the largest build-to-suit office project in Chicago. Zurich a north america insurance company headquarters includes a 735,000 square foot building rising to 11 stories at its tallest, shaped something like the letter A resting on its side.
Zurich looked at a multitude of factors and in the end made the decision that investing in a new state of the art regional headquarters would be the right choice. The project is due to be completed late summer of 2016.
4. Dubai World Central Airport
Al Maktoum International Airport
Al Maktoum International Airport
This massive $32 billion structure sent its first commercial jet into the air in late October 2013. The project isn’t scheduled for full completion until 2027 and is expected to become the world’s busiest airport, however, with plenty of other contenders quickly taking shape in Asia and the Middle East, it’s has stiff competition.
Dubai World Central Airport is expected to shuttle 160 million passengers through Dubai every year making it the busiest airport on earth.
5. Bao’an International Terminal 3
Bao’an International Terminal 3
Bao’an International Terminal 3
Bao’an plays a pivotal role in the Pearl River Delta: It serves both Shenzhen and Hong Kong, via a connecting ferry. Terminal 3 is an expansion project designed by the Italian architect Massimiliano Fuksas. The centrepiece of the expansion is a new runway, which is built on a 108,000-foot piece of land reclaimed from the River Delta.
6. Crossrail
Crossrail, London England
Crossrail tunnelling began in 2012 and ended at Farringdon, London in May with the break through of tunnelling machine Victoria. Eight 1,000 tonne tunnelling machines bored 26 miles or 42 km of new 6.2m diameter rail tunnels under London.
London is the fastest growing capital city in Europe and today it is home to 8.6 million people with the population expected to reach 10 million by 2030. TfL’s work is critical to supporting the continued growth and regeneration of London.
As we reflect upon these impressive feats by mankind, we can only imagine what the next big wonder will be. Is it the secretive Nicaragua canal? Could it be Elon Musk’s proposed Hyperloop concept? Or perhaps it will be a new state of the art high speed train developed by China, USA or the UK?
Did we miss one? Please let us know by commenting below.
Project Journal had the privilege of interviewing AXELOS previous CEO Peter Hepworth. Peter provided us with an insight into his role and AXELOS as a whole in October 2015.
AXELOS CEO Peter Hepworth
Peter joined AEXLOS as CEO in July 2013 and was previously Managing Director for Activision Blizzard a $400 million turnover and $150million EBIT business. In 2014, Activision Blizzard was the fifth largest gaming company in the world by revenue.
Peter is an economics graduate, chartered accountant, with an M.B.A. from Cranfield and A.M.P. from INSEAD.
What is AXELOS?
AXELOS is a joint venture set up in 2014 by the Government of the United Kingdom and Capita, to develop, manage and operate qualifications in best practice, in methodologies formerly owned by the Office of Government Commerce (OGC).
AXELOS is an independent organisation, allowing the user community to focus more on the content of frameworks and guidance without much interference. The firm puts a heavy focus on the guidance given, ensuring the content is fuelled by good ideas to keep the ITIL structure up to date. But while the business has a combination of access to one of Britain’s largest corporations and the UK government, more than 75% of publication sales and Prince2 certification is sold outside of the UK, a trend that is growing faster due to emerging markets.
The company varies its training approach. Its Portfolio, Programme, and Project Management Maturity Model (P3M3), for example, encourages users to assess their performance against benchmarks. Mike Acaster, PPM portfolio manager, says: “PRINCE2 is applicable to many sizes of organisation, but sometimes it’s better to be a bit more specific. It’s about tailoring advice for that context. In some cases it has been tailored, and people don’t realise it’s PRINCE2 – you have to scratch the surface.
How do you view the future of project management?
After years of being associated with large engineering and construction projects, project management has moved beyond infrastructure. Firms across different countries and sectors now acknowledge the need to manage their processes and keep costs and timing under control. As businesses begin to recognise the importance of project management worldwide, questions are being asked about the standards required. AXELOS is focusing on how these can apply to different staff and situations, as well as how workers can develop a career path in project management.
Is AXELOS popular aboard?
“It’s hard to measure the adoption of our products, but if you look at the number of exams taken, you can see strong growth outside the UK, as well as in the UK,” he says. “In the US there’s a lot of interest, and the biggest international user of PRINCE2 is the UN, to make sure their aid development is correctly managed.
“Our Managing Successful Programmes (MSP) product was used to deliver the Olympic Games. I was in Tokyo after they had won the right to host Tokyo 2020 and the focus was ‘When can we have MSP?’ They want to see the same success as London has had.”
What are the future priorities for AXELOS?
“Career path. For the individual, it’s about how your career can develop. There’s a different skill set between project and portfolio management, and no linear route. It comes to modularisation. We have been able to offer different dimensions.
Cyber Resilience is next. Companies need to put more emphasis on improving their reactions to cyber attacks rather than continuing to focus on prevent. Although there are a number of standards and best practices in place to prevent cyber attacks, firms are still falling foul, and this is usually due to the internal attitude and people, rather than technology.
New products launched in 2015 include PRINCE2 Agile; Cyber Resilience Best Practice and Continuing Professional Development (CPD).
What’s next?
Young people are learning things online and changing how it is done. We want our members to feel proud about having AXELOS qualifications and have launched digital badges so that project professionals can display their mark of professionalism across popular social networks.
Digital badges are tokens that appear as icons and are awarded to signify learning achievements in a way that can be easily verified and shared online. Our members digital badge’s will hold and display information about their professional development activity as well as the issue date and an expiry date.
Individual workers, organisations and entire industries can benefit from badges. Badges are a new form of currency – a more transparent and efficient way to communicate the acquisition and development of workplace skills.
From AXELOS to Microsoft, IBM to Oracle, many leading companies have adopted digital badges as a form of recognition for continuing professional development and certifications. The individuals who earn these badges enthusiastically share them to LinkedIn, Twitter, Facebook and other online destinations. Once shared, anyone can verify the authenticity of and learn more about the individual’s abilities. That shareability and verification can make all the difference in a competitive job market, whether an individual aspires to move ahead in her current position or move into a different job.
We also want continued openness from AXELOS, even more community collaboration and specific actions to further increase the relevance of AXELOS in the future.
Where do you believe project management is heading?
Anyone can benefit from project management guidance. “We are all project managers now,” he says.
For the first time, millions of professionals across the globe qualified in ITIL ®, PRINCE2 ® and PRINCE2 Agile┞¢ will be able to track and record their professional development through a Continuing Professional Development (CPD) scheme as part of the new AXELOS Professional Development Programme, which launches today.
The AXELOS Professional Development Programme is an online membership programme aligned to the global best practice frameworks of ITIL, PRINCE2 and PRINCE2 Agile, that provides members with a range of specialised tools. Members will be able to assess their ability against industry benchmarks and gain access to exclusive content and activities designed to develop their skills and knowledge.
The programme will give practitioners the confidence and tools to keep up-to-date and relevant in their field while supporting them in their professional development. By completing the required CPD points, members will earn a digital badge that can be shared via online platforms to demonstrate their relevance and commitment to professional development.
Peter Hepworth, AXELOS Chief Executive, said: “There are millions of practitioners with either ITIL or PRINCE2 qualifications, and we want to champion these professionals by giving them a means to develop their knowledge and skills. This new programme is all about offering additional value for IT service management and project management professionals which goes beyond passing an exam and gaining a qualification.
“Ongoing investment in professional development also benefits organizations as well as individuals. Employers can ensure that their employees are continually developing their skills and the new digital badges will also help employers source the right talent by using them to differentiate against individuals who haven’t kept their skills up to date.
“The scheme will enable ITIL and PRINCE2 practitioners to achieve industry recognition and enhance their own personal brand. In addition, employers who invest time and money in CPD can develop their teams and drive up standards while improving staff loyalty and morale.”
Those wishing to join the scheme must hold an ITIL or PRINCE2 qualification. AXELOS are running a promotion so anyone joining in 2015 can save £100 on annual membership costs, and just pay the initial £25 registration fee.
The Professional Development Programme is the latest addition to the best practice portfolio owned by AXELOS – a joint venture between the UK Government and Capita plc. More information can be found on the AXELOS website: https://www.axelos.com/professional-development
Project Journal staff were not involved in the creation of this content.
